Top MS 90 Degree Threaded Elbow Manufacturer in india
90-DEGREE THREADED ELBOWS
Turn right. Fit tight.
Krishna Forge Fitting manufactures MS 90 Degree Threaded Elbows designed for right-angle pipe connections, combining high strength, dimensional accuracy and convenient threaded installation.
What is an MS 90 Degree Threaded Elbow?
- An MS 90 Degree Threaded Elbow is a mild steel fitting designed to connect two pipe sections at a right angle. Its threaded ends allow installation with compatible threaded pipes, creating a mechanical connection without the need to weld the fitting to the pipe.
- Krishna Forge Fitting manufactures these elbows for industrial applications, with an emphasis on strength, dimensional accuracy and rust resistance. The product listing also identifies an NPT 2000-class configuration covering nominal sizes from ½ inch to 4 inches.
Strong at every turn.
Right-Angle Connection
The 90-degree design allows piping to change direction within compact industrial layouts.
Threaded Assembly
Compatible threaded connections allow pipe assembly without welding the fitting to the adjoining pipes.
High Strength
Mild steel construction provides mechanical strength for industrial piping systems.
Dimensional Accuracy
Controlled manufacturing helps maintain consistent fitting dimensions and thread alignment.
General Product Specifications
| Specification | Details |
|---|---|
| Product Name | MS 90 Degree Threaded Elbow |
| Material | Mild Steel (MS) |
| Listed Size | 4 Inches |
| Nominal Size Range (NPT 2000 Class) | ½ Inch – 4 Inches |
| Bend Angle | 90 Degrees |
| Thread / Class Detail | NPT 2000 Class |
| Application | Industrial |
| Manufacturing Technique | Hot Rolled |
| Packaging Type | Box |
| Brand | Krishna Forge Fitting |
| Country of Origin | India |
Built for Diverse Piping Requirements.
Boilers, Heat Exchangers, Condensers & Pulverizers
Water Treatment Plants
Sprinkler Irrigation Systems
Industrial Fabrication
Steel Plants
Fertilizer Industry
Get the full details.
Download Krishna Forge Fitting’s product catalogue for threaded elbow dimensions, fitting configurations, pressure classes and technical reference information.
Your questions, answered.
What is an MS 90 Degree Threaded Elbow?
It is a mild steel pipe fitting used to connect two pipe sections at a 90-degree angle through compatible threaded connections.
What is the purpose of a 90-degree elbow?
A 90-degree elbow changes pipeline direction by a right angle, helping route pipes around equipment and structural obstacles.
What sizes are available?
The website specifies an NPT 2000-class range from ½ inch to 4 inches, with a 4-inch fitting featured in the main product specifications.
Does an MS 90 Degree Threaded Elbow require welding?
No. Its threaded connection design allows assembly using compatible pipe threads without welding the fitting.
What should be considered before selecting a threaded elbow?
Important factors include nominal pipe size, NPT thread compatibility, pressure class, operating temperature, material suitability and the fluid being transported.
